Skip to main navigation Skip to search Skip to main content

Simulation of lubricant recovery after heat-assisted magnetic recording writing

  • University of California at Berkeley

Research output: Contribution to journal › Article › peer-review

Abstract

The lubricant in a heat-assisted magnetic recording (HAMR) hard disk drive must be able to withstand the writing process in which the disk is locally heated a few hundred degrees Celsius within a few nanoseconds and be able to sufficiently recover the lubricant depletion and accumulation zones so as to allow for stable flying heights and reliable read/write performance. In a previous publication, we simulated the distortion of thin Zdol films due to a thermal spot during HAMR writing and predicted several Angstroms of depletion. In this paper, we continue these simulations into recovery. Our simulation results indicate that lubricant deformation caused by small thermal spots of 20-nm full-width half-maximum (FWHM) recover on the order of 100-1,000 times faster than larger 1-μm FWHM spots. However, the lubricant is unable to recover from sufficiently high writing temperatures. An optimal thickness at which HAMR writing deformation recovers fastest is apparent for sub-100-nm FWHM thermal spots. Our simulations show that simple scaling of experimental observations using optical laser spots of diameters close to 1 μm to predict lubricant phenomena induced by thermal spots close to 20-nm FWHM may not be valid. Researchers should be aware of the possibility of different lubricant behavior at small scales when designing and developing the HAMR head-disk interface.

Original languageEnglish
Pages (from-to)163-174
Number of pages12
JournalTribology Letters
Volume52
Issue number1
DOIs
StatePublished - Oct 2013

ASJC Scopus Subject Areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films

Keywords

  • Hard disk drives
  • Heat-assisted magnetic recording
  • Lubricant
  • Recovery

Fingerprint

Dive into the research topics of 'Simulation of lubricant recovery after heat-assisted magnetic recording writing'. Together they form a unique fingerprint.

Cite this